Ruler | AMD Ryzen Threadripper |
Socket connector (SOCKET) | TRX4 |
Compatibility | Motherboards Socket TRX4 |
Number of Cores | 32 cores |
The number of flows | 64 |
CPU frequency | 3700 |
The volume of the cache l3 | 131072 |
The code name of the microarchitecture | Threadripper 3 Gen |
The name of the graphic nucleus | No integrated graphics |
Unlocked factor | + |
Memory type | 3200 |
Process process | 7 |
Thermal board | 280 |
Performance | 64191 |
Cooling in the kit | Without cooler |
Compatible cooling systems | Cooling systems |
Type of | AMD Motherboards |
Socket connector (SOCKET) | TRX4 |
Processors | TRX4 processors |
Chipset (North Bridge) | AMD TRX40 |
Type of memory | DDR4 DIMM |
Compatible RAM | DDR4 for PC |
Number of memory slots | 8 |
TOMAL CHANNals | 4 |
Max. memory size | 256 |
The minimum memory frequency | 2133 |
Maximum memory frequency | 4666 |
Network adapter (LAN) |
1 x 1000 Mbps 1 x 2500 Mbps |
Wi-Fi wireless module | 802.11a/b/g/n/ax |
Bluetooth module | 5.0 |
Sound card | SupremeFX S1220A |
Sound scheme | 7.1 |
The number of Sata III | 8 |
Number PCI-E 1x | 1 |
Number PCI-E 16X | 3 |
Support PCI-E 16X V4.0 | + |
Number of internal USB 2.0 | 2 |
Number of internal USB 3.2 | 2 |
Number of slots M.2 | 3 |
SLI or Crossfire support | SLI/CrossFire |
24-pin | 1 |
8-pin | 2 |
Number of external USB 2.0 | 4 |
Number of external USB 3.2 | 7 |
Top external USB Type-C | 1 |
VGA connector | - |
DVI-D connector | - |
HDMI connector | - |
DisplayPort connector | - |
Output s/pdif | + |
RAID controller | 0, 1, 10 |
Form factor | ATX |
Compatibility with the body | ATX chassis |
Brand | ASUS motherboards (ASUS) |
RGB Header | 2 x RGB Header + 2 x Addressable header |
Overclocking | + |
Peculiarities |
Maximum RAM frequency specified in OS mode PCI Express 4.0 support USB 3.2 Gen2 Type-C |
Color | Черный с серым |
Type of | DDR4 |
Purpose | For PC |
The volume of one module | 16 |
The number of modules | 2 |
Form factor | DIMM |
Frequency | 3600 |
Passing capacity | 28 800 |
CAS LATENCY (CL) | CL18 |
Tailers scheme | 18-22-22-42 |
ECC memory | No ECC support |
XMP | XMP profile support |
Supply voltage | 1.35 |
Working temperature | От 0 до 70 |
Storage temperature | -40 to +85 |
Peculiarities |
Backlight Cooling module |
Additionally |
Aluminum heat spreader XMP 2.0 support Overclocking series RGB lighting |
Color | Черный |
RAM status | New |
Form factor | ATX |
Power | 1200 |
Fan | 135 |
Efficiency (certificate 80 plus) | Platinum |
Power factor correction (PFC) | active |
Noise level | 33 |
+5V | 25 |
+3.3V | 25 |
+12V1 | 24 |
+12V2 | 24 |
+12V3 | 38 |
+12V4 | 38 |
-12V | 0.5 |
+5Vsb | 3 |
Connection to the motherboard | 20+4 pin |
Connection to video cards | 6+2-pin 6 шт. |
The processor power | 4 pin, 8 pin, 8+4 pin, 8+8 pin |
Number connectors 4-Pin Molex | 4 |
Number of SATA connectors | 11 |
Number of 4-Pin Floppy connectors | 1 |
Color | Черный |
Dimensions | 170 x 150 x 86 |
The weight | 1.93 |
Unfastened cables | + |
Cracking protection | + |
Status PSU | New |
Additionally |
Safety OVP (Over Voltage Protection) OPP (Overload Protection) OCP (Overload protection for any of the outputs of the unit individually) SCP (Protection Short Circuit Protection OTP (Over Temperature Protection) SIP (Surge and Surge Protection) UVP (Under Voltage Protection) |
Compatibility with Intel | Not compatible with all Intel chipsets |
Compatibility with AMD |
Compatible: TR4 TRX4 Not compatible: AM2 AM2+ AM3/AM3+/FM1 AM4 FM2/FM2+ |
Diameter | 135 |
Tower of the tower | Tower |
Connection | 4 pin PWM |
Backlight | Без подсветки |
Type of bearing | Hydrodynamic bearing |
Fan rotation speed | 1500 |
Maximum TDP | 250 |
Noise level | 24 |
The number of heat pipes | 7 heat pipes |
The height of the fan | 163 |
The number of fans | 2 вентилятора |
Resource | 300 000 |
Radiator material | Aluminum and copper |
Dimensions | 145.7 x 136 x 162.8 |
The weight | 1180 |
The color of the case | Черный |
Cooler status | New |
The color of the impeller | Черный |
Form factor | M.2 2280 |
Memory size | 1 ТБ |
Type of memory cells | 3D-NAND TLC |
Interface | PCIe 3.0 x4 |
NVME | Support for NVMe protocol |
Reading speed | 2200 |
Recording speed | 2000 |
Recording resource (TBW) | 600 |
Time -leaning time for refusal | 2 млн |
Power consumption |
0.0032W (Idle) 0.08W (Typical) 1.7W (Maximum Read) 4.5W (Maximum Write) |
Working temperature | От 0 до 70 |
Storage temperature | От −40 до +85 |
Additionally |
256-bit XTS-AES encryption Peak vibration operation 2.17G (7-800Hz) Peak vibration storage 20G (10-2000Hz) |
Dimensions | 80 x 22 x 3.5 |
The weight | 6.8 |
Equipment | SSD drive |
Type of | HDD |
Ruler | Toshiba P300 |
Form factor | 3.5″ |
Memory size | 2 TB |
Interface | SATA III |
Data transmission speed | 600 |
Spindle rotation speed | 7200 |
Clipboard | 64 |
Noise level | 28 |
Power consumption | 6.4 |
Dimensions | 147 x 101.6 x 26.1 |
The weight | 450 |
Status HDD | Новый |
Type of | Midi tower |
Form factor of the motherboard |
ATX EATX Micro-ATX Mini-ITX |
Backlight | Без подсветки |
Installed fans (on the front panel) | 3 x 120 |
Installed fans (on the back panel) | 1 x 140 |
Additional fans (on the back panel) | 1 x 140 |
The ability to install additional fans |
1 x 140 mm (on the back panel) 3 x 120 mm / 2 x 140 mm (on the top panel) View case fans |
The ability to install it | Tank and pump: up to 224 mm (along cable rack) |
The maximum height of the cooler | 185 |
Additionally |
Aer F120 front panel fan parameters Speed 1200± 200 rpm Airflow 50.42 CFM Noise level 28 dBA Rifle Bearing Aer F140 rear panel fan parameters Speed 1000± 200 rpm Airflow 68.95 CFM Noise level 29 dBA Rifle Bearing Maximum thickness of the front radiator 60mm Maximum thickness of the radiator on the top panel 30mm |
The presence of a power supply | Case without PSU |
The location of the compartment for BP | Bottom position of the PSU bay |
Number 3.5 ″ internal compartments | 4 x 3.5″ internal bays |
Number 2.5 ″ compartments | 7 x 2.5″ bays |
The number of expansion slots | 7 expansion slots |
Ports |
2 x USB 3.1 Gen 1 (3.0) 1 x USB Type-C 3.1 Gen 2 (3.1) 1 x headphone port 1 x microphone port |
The location of the ports | On the top panel |
The maximum length of the video card | 413 |
Peculiarities |
Side window Screwless baying Cable management Tempered glass side window |
Additionally |
Maximum motherboard length 272mm Cable-management 18-22mm |
Material | SGCC Steel and glass |
Dimensions | 516 x 494 x 230 |
The weight | 12.1 |
Color | Красный с черным |
Memory size | 16384 |
Tire of memory | 256 |
Graphic processor | NVIDIA Quadro RTX 5000 |
Type of memory | GDDR6 |
Series | Quadro RTX |
The frequency of the graphic nucleus | 1620 |
The frequency of video memory | 14000 |
Maximum resolution | 7680x4320 |
Performance | 16200 |
The processor family | NVIDIA |
Interface | PCI Express 3.0 x16 |
Connectors |
4 x DisplayPort v1.4 1 x USB Type-C (VL) |
Backlight | Without backlight |
The number of fans | 1 fan |
Support for standards | DirectX 12, OpenGL 4.5 |
Support CUDA | + |
The length of the video card | 267 |
The height of the video card | 112 |
The number of occupied slots | 3 |
The need for additional nutrition | + |
Recommended power power supply | 600 |
Connector add. Nutrition | 8 pin + 6 pin |
The number of supported monitors | 4 |
Additional Information |
Error Correction Codes (ECC) in graphics memory 32-bit floating point filtering and texture blending for each component 64x Full Scene Anti-Aliasing (FSAA) / 128x FSAA in SLI mode Four DisplayPort 1.4 outputs (with resolutions such as 3840 x 2160 at 120 Hz, 5120 x 2880 at 60 Hz, and 7680 x 4320 at 60 Hz) according to key specifications) |
Color | Серый с черным |
Comments (0)
Только зарегистрированные пользователи могут оставлять комментарии